Compactor Troubleshooting
- First, check your indicator lights (amber, green & red)
- Make sure the disconnect switch is connected and has power. Then check your fuses.
- Make sure the key switch is turned to the ON position - 1 click to the right location
- Check that all (3) legs have proper power 110-120v
- Make sure the hopper access door is in the closed position
- Make sure the hopper access door switch/safety shut off eye is clear of debris (i.e. dust, garbage, etc.) If this is not clear please lightly brush off to clean. (*the eye is located directly below the hopper access door)
-Press the reboot/reset button located on the control panel
-Bagger only - make sure the bag switch is engaged i.e. bags should be pulling the chain away from the hopper
US Chutes staff is always available for troubleshooting
1(800) US CHUTES
|
|
